Select the seat model to find out how to place the seat cover correctly.
INDIVIDUAL SEAT COVER
1º Place the cover as if it were a sock, and insert the rigid piece that you will find inside the cover ⓵, between the backrest and the seat.
2º If your seat has armrests, insert them through the Velcro side openings, and the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner that you will find in the lower area of the cover to adjust it ⓷ and tie using the elastic cord terminal to the seat adjustment bar ⓸ and thus prevent the cover from moving.
3º If you have any pockets or accessories hanging from the headboard, use the rear opening to access the headboard brackets ⓹.
ARMREST COVER
1st Distinguish between the right (Right 🟢) and left (Left 🔴) armrest for each armrest according to its side.
2º Place the cover as if it were a sock, and insert the armrest through the opening until the end, leaving the opening for the armrest shaft.
DOUBLE FRONT SEAT COVER
1º Place the cover as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.
2º Insert the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner that you will find in the lower area of the cover to adjust it ⓷ and tie using the elastic cord terminal to the seat adjustment bar ⓸ and thus prevent the cover from moving.
3º If you have any pockets or accessories hanging from the headboard, use the rear opening to access the headboard brackets ⓹.
4º If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.
CALIFORNIA DOUBLE REAR SEAT COVER
1º Place the cover as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.
2º Insert the headboards through the upper openings ⓶. Finally, pull the tensioner that you will find in the lower area of the cover to adjust it ⓷ and ⓸.
3º If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.
DOUBLE REAR SEAT COVER
1º Place the cover as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.
2º Insert the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner that you will find in the lower area of the cover to adjust it ⓷ and tie using the elastic cord terminal to the seat adjustment bar ⓸ and thus prevent the cover from moving.
3º If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.
TRIPLE REAR SEAT COVER
1º Place the cover as if it were a sock, and insert the 3 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.
2º Insert the headboards through the upper openings ⓶. Finally, pull the tensioner that you will find in the lower area of the cover to adjust it ⓷ and ⓸.
3º If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.
