1º Place the cover as if it were a sock, and insert the rigid piece that you will find inside the cover ⓵, between the backrest and the seat.

2º If your seat has armrests, insert them through the side Velcro openings, and the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner located at the bottom of the cover to tighten it ⓷ and tie the elastic cord end to the seat adjustment bar ⓸ to prevent the cover from moving.

3rd If you have any pocket organizer or accessory hanging from the headboard, use the rear opening to access the headboard supports ⓹

1º Distinguish between the right armrest (Right 🟢) and left armrest (Left 🔴) for each armrest according to its side.

2º Place the cover as if it were a sock, and insert the armrest through the opening all the way to the end, leaving the opening for the armrest shaft.

1º Put the cover on as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.

2º Insert the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner located at the bottom of the cover to tighten it ⓷ and tie the elastic cord end to the seat adjustment bar ⓸ to prevent the cover from moving.

3rd If you have any pocket organizer or accessory hanging from the headboard, use the rear opening to access the headboard supports ⓹

4th If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.

1º Put the cover on as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.

2º Insert the headers through the upper openings ⓶. Finally, pull the tensioner located at the bottom area of the cover to adjust it ⓷ and ⓸.

3rd If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.

1º Put the cover on as if it were a sock, and insert the 2 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.

2º Insert the backrest adjustment wheel through the circular opening ⓶. Finally, pull the tensioner located at the bottom of the cover to tighten it ⓷ and tie the elastic cord end to the seat adjustment bar ⓸ to prevent the cover from moving.

3rd If your seat has isofix, you can access it by finishing opening the precut openings in the area marked for the isofix.

1º Place the cover as if it were a sock, and insert the 3 rigid pieces that you will find inside the cover ⓵, between the backrest and the seat.

2º Insert the headers through the upper openings ⓶. Finally, pull the tensioner located at the bottom area of the cover to adjust it ⓷ and ⓸.

3rd If your seat has isofix, you can access it by finishing opening the pre-cut openings in the area marked for the isofix.