Description
Click here to see the description and compatibility guide. 
DO YOU KNOW OUR COVERS?
Do you want to protect the seat of your camper van and give it a new look? The Glassy waterproof cover is your solution in any of its versions or designs. This double version is perfectly adapted to most of the bench seats. OKB TYPE of Fiat Ducato, Peugeot Boxer, Citroën Jumper, Volkswagen Crafter, Mercedes Sprinter, Renault Master, Nissan NV400, Ford Transit, etc. vans that can mount camper vans such as Benimar, Pilote, Adriá, Knaus, Weinsbers, Burstner, Challenger, Frankia,... and that do not have the seat belt integrated in the seat (consult in case of doubt).
WATERPROOF AND RESISTANT
As for the fabric, we have achieved a balance between waterproofing and breathability by providing the cover with a resistance of up to 1,000 columns of water with a PV interior that also prevents breakage due to exposure to the sun, but does not exert a total screen between the seat and your body, allowing air circulation. By not creating a total screen, we promote breathability, so we do not recommend riding very wet (wet neoprene) for long periods of time, because due to the pressure, there is a possibility that water will leak very slowly...
Not suitable for use in upholstery of suede or leatherette white or ecru Do not use on white or ecru suede or leatherette upholstery as depending on use, sun exposure or temperature changes the cover may migrate colour and mark the seat upholstery.
INNOVATIVE DESIGN
We have different designs to suit both the most conservative and the most daring customers. With Glassy seat covers, in addition to protecting the seats, you will give a new look to your camper van.
This product corresponds to a double rear bench seat, and contains 4 pieces: Cover for seat base, cover for backrest and 2 covers for the headrests.
Andres - –
Hello, is it valid for use on bench with isofix?
Mcrs90 - –
Good Andres! It is fully compatible with isofix, for any questions, talk to us by whatsapp at 698952512, we will be happy to answer your questions!!!
Generoso Luis Domínguez Alego (verified owner) - –
Very happy with the purchase, the covers are magnificent, and the attention that I have been given fantastic. without a doubt I recommend this store and its products.
Glassy Europe - –
Thank you so much Gene for your comment, we are so glad that you like the holsters so much!!!😉
We always try with our attention, that you have a great shopping experience and that you have no doubts about the products you buy.🥰😉
Anxo - –
Good morning, is there a solution from Gladys for the above comment?
Glassy - –
Hello Anxo!
If your rear bench has the anchors in the central part, this is not the appropriate cover. This cover is for rear benches like the ones you can see in the compatibility guide, which consist of two independent cushions.
If your bench is a general rear bench with the anchors in the center, we will soon have a model of cover specially designed for it 😊.
Anyway, write us by Whatsapp and send us a picture of your seat, to be 100% sure that it is that seat cover.
Thank you!
Dani (verified owner) - –
Nothing to say about the material of the cover (same as for the front ones). But... the bench seat cover has the problem that there is no hole to access the seat belt anchorage. The cover covers the buckle anchorage. In my case it is a Fiat Ducato Weinsberg where both belts are anchored from the centre of the bed (like most of them). As it is a single cover, the belt anchorages are covered. No good!!! Either you have to drill holes in the cover or you have to remove the cover to anchor the belt.
jmgd - –
Good morning Dani, thank you for your comments, could you please send us a photo of your bench to the WhatsApp number on our website so that we can evaluate it and give you an appropriate response? Thanks in advance